Compatible with Raspberry Pi Pico 2 Microcontroller Board, with Yellow Pre-Soldered Header, Based on Official RP2350 Chip, Dual-Core & Dual-Architecture Design 4MB Flash, 3 Items
Overview Pico 2 with yellow Pre-Soldered Header microcontroller board is
powered by Official RP2350 microcontroller chip, with unique dual-core and
dual-architecture design, running up to 150 MHz, embedd ed 520KB of SRAM and
4MB of on-board Flash memory, as well as 26x multi-function GPIO pins. For
software development, either Rasp Pi's C/C++ SDK, or the MicroPython is
available. There're also complete development resources and tutorials to help
you get started easily, and integrate it into end products quickly. Key
features Official RP2350 microcontroller chip Adopts unique dual-core and
dual-architecture design: ---dual-core Arm Cortex-M33 processor and dual-core
Hazard3 RISC-V processor, flexible clock running up to 150 MHz ---The unique
dual-core, dual-architecture capability of RP2350 allows users to choose
between a pair of industry-standard Arm Cortex-M33 cores, and a pair of open-
hardware Hazard3 cores, giving developers a chance to experiment with the
RISC-V architecture in a stable, well-supported environment 520KB of SRAM, and
4MB of on-board Flash memory Castellated module allows soldering direct to
carrier boards USB 1.1 with device and host support Low-power sleep and
dormant modes Drag-and-drop programming using mass storage over USB 26 ×
multi-function GPIO pins, configurable pin function, allows flexible
development and integration 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 24 ×
controllable PWM channels Temperature sensor 12 × Programmable I/O (PIO) state
machines for custom peripheral support Package Content Pico 2 with yellow Pre-
Soldered Header x1 13PIN yellow pin header x1 USB-A to micro USB cable ~1.2m
x1
 
Product Features
  

         
RPi Pico 2 microcontroller board (with yellow Pre-Soldered Header) is powered by Official RP2350 microcontroller chip, with unique dual-core and dual-architecture design, running up to 150 MHz, embedded 520KB of SRAM and 4MB of on-board Flash memory, as well as 26x multi-function GPIO pins
         
Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz
         
520KB of SRAM, and 4MB of on-board Flash memory
         
26  multi-function GPIO pins. 2  SPI, 2  I2C, 2  UART, 3  12-bit ADC, 24  controllable PWM channels
         
Castellated module allows soldering direct to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant modes.
         
Drag-and-drop programming using mass storage over USB. 12  Programmable I/O (PIO) state machines for custom peripheral support
         
For software development, either Rasp Pi's C/C++ SDK, or the MicroPython is available. There're also complete development resources and tutorials to help you get started easily, and integrate it into end products quickly