NewYall 4PCS 315MHz TPMS Tire Pressure Monitoring System Sensors for 2008-2016 Subaru Forester Outback Legacy Impreza WRX STi Tribeca XV CROS 28103AJ00A 28103SG000 28103-AG01C
_x000d_
For SubaruForester 2009-2016Legacy 2009-2016Outback 2009-2016Impreza_x000d_
2008-2015Impreza WRX, WRX STi 2008-2014Tribeca 2009-2014WRX, WRX STi_x000d_
2015-2016XV Cros 2013-2015 Instruction:1. Install the tire pressure sensor_x000d_
correctly2. Restart all tires to nominal values according to the tire label_x000d_
(usually located on the door frame)3. Starting from the left front wheel,_x000d_
apply the TPMS tool and activate each sensor in sequence in the order of left_x000d_
front, right front, right rear, left rear and full-size spare tire (if any)4._x000d_
Turn the ignition switch to the ON position5. Connect the TPMS tool to the OBD_x000d_
II interface, apply the OBD learning function to write to sensor D, keep the_x000d_
ignition switch in the ON position, and re-activate each sensor6. Turn off and_x000d_
then on the ignition switch7. Road test at a speed higher than 30 km/h for at_x000d_
least 10 minutes to ensure that the tire pressure system is working properly_x000d_
(the tire pressure light is off)
 _x000d_
_x000d_
Product Features
_x000d_
  
_x000d_
         
For Subaru Forester 2009-2016
_x000d_
         
For Subaru Legacy 2009-2016
_x000d_
         
For Subaru Outback 2009-2016
_x000d_
         
For Subaru Impreza 2008-2015
_x000d_
         
For Subaru Impreza WRX, WRX STi 2008-2014
_x000d_
         
For Subaru Tribeca 2009-2014
_x000d_
         
For Subaru WRX, WRX STi 2015-2016
_x000d_
         
For Subaru XV Cros 2013-2015
_x000d_