Gump's grocery MCP2515 Module CAN Bus TJA1050 Receiver Transceiver SPI Interface
Description:The TJA1050 is a high-speed CAN Bus transceiver, and it represents
the interface between the Controller Area Network (CAN Bus) protocol
controller, i.e. the Microchip MCP2515, and the physical bus. The device
provides differential voltage for transmission to the CAN bus and TTL signals
for receive capability to the CAN Bus controller.Support CAN V2.0B
specification, the communication speed 1Mb / S- 0 to 8-byte data field-
Standard frame and expand the frame and remote frame- 5V DC power supply
module, SPI interface protocol control- 120 ohm termination resistors.
Impedance matching, ensure drive capacity long-distance data transmission
against signal radiation- Working current: typ. 5mA, 1 microamp standby
current. Except the power indicator- Working temperature: Industrial grade to
85 ‚ÑÉ -40 ‚ÑÉSpecification:- Size: Approx. 4.4x 2.8cm/ 1.73x 1.10inch- Screw hole
center spacing: Approx. 23x 38mm/ 0.91x 1.50inchPackage Included:1 x MCP2515
Module CAN Bus TJA1050 Receiver Transceiver SPI Arduino
 
Product Features
  

         
Microchip Technologys MCP2515 is a stand-alone Controller Area Network (CAN Bus) controller that implements the CAN 2.0B specification.
         
It is capable of transmitting and receiving both standard (11-bit) and extended (29-bit) data and remote frames.
         
The MCP2515 has two acceptance masks and six acceptance filters that are used to filter out unwanted messages, thereby reducing the host MCUs overhead.
         
The MCP2515 interfaces with microcontrollers (MCUs) via an industry standard Serial Peripheral Interface (SPI).
         
Size: Approx. 4.4x 2.8cm/ 1.73x 1.10inch