Flycolor 80A ESC 3-6S Electric Speed Controller 5v/6v/7.4v 5A BEC with XT60 & 3.5mm Bullet Plugs for RC Drone Airplane Brushless Motors
Flycolor 80A Electric Speed Controller (ESC) is a great little powerful ESC
that runs very well and doesn't run hot like other ESCs! The ESC comes pre-
soldered with 3.5mm Bullet Plugs and an XT60 Plug, eliminating the need for
you to solder your own plugs on! Specs: Continuous Output: 80A Bursts Output:
100A for 15 seconds UBEC: 5V/6V/7.4/5A Lipo Battery: 3 - 6s (cells) NiCd/NiMH:
5 - 18 cells Voltage Input: 11.1v - 22.2v Size: 82mm x 36mm x 18mm Weight:
93.4g Motor Type: Brushless Motor
 
Product Features
  

         
Function: Using C8051F850 MCU, pipelined 8-bit C8051 core . FlyDragon Lite series, unique circuit design, Built-in 5V/6V/7.4V, 5A adjustable BEC, it can be selected by switch according requirement (Default 5V. Make sure BEC voltage is correct before connection.).
         
Start mode can be set, throttle response is fast and speed control is linear smooth.strong anti-interference.
         
Multiple protection features: Abnormal startup protection, over-heat protection, throttle signal loss protection, low-voltage cut-off protection etc.Low-voltage protection threshold value can be set.
         
High power safety performance: wherever the throttle lever is, the motor will not start immediately.Judge the working condition via alarm.
         
Users can set functions according their needs, cycle programming menu which easy to operate .