3 PCS 3S 11.1V 12V 12.6V 60A 18650 Charger PCB BMS Protection Board with Enhance Li-ion Lithium Battery Charger Lipo Cell Module for Drill Motor
Suitable for: 1.Suitable for lithium batteries with nominal voltage of 3.7V
and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries,
no size limit) 2.Suitable for electric drill with starting current below 120A
and power below 260W.Note:To successful starting the drill requires three
15C-20C power batteries, or six 10C-15C power batteries (ordinary 18650
battery can not start the drill!! Recommended power battery models: for SONY
VTC4, VTC4A, VTC5A, VTC6).0V and 12.6V cable, use copper wire of more than 3
square millimeters .Strictly according to the diagram wiring:
0V/4.2V/8.4V/12.6V,Otherwise it will cause damage to the chip.Do not mix the
good battery and poor battery to use.The internal resistance of 3 battery
capacity are closer will be better.Highlight:Over-discharge protection,
overcurrent protection,overcharge protection;High charge and discharge
current;Compact size and lightweight.Specifications:Charging voltage:12.6v ~
13.6vOver Charge voltage:4.25±0.05vOver Discharge voltage:
2.5v±0.05vContinuous discharge current (upper limit): 60A (if the cooling
environment is not good, please reduce the load current );Continuous charge
current (upper limit): 10AInternal resistance: Less than 100mΩWorking
temperature:-40 ~ +50CelsiusStorage Temperature:-40 ~ +80CelsiusPackage
inlcuded:3 x 3S 60A lithium Battery Protection Board with Enhance
 
Product Features
  

         
Suitable for: 1.Suitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, no size limit) 2.Suitable for electric drill with starting current below 120A and power below 260W.
         
Charging voltage:12.6v ~ 13.6v Over Charge voltage:4.250.05v Over Discharge voltage: 2.5v0.05v
         
Continuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current ); Continuous charge current (upper limit): 10A