Soda Machine Adapter Hose Kit Direct Connect to Soda Water Make Machine
Specification:Hose length: 60 Inch/150cmWorking pressure: 5000 PSIThread For
Large CO2 Tank: CGA320 G1/2-14.Instructions:1.Screw the CGA320 Nut to large
CO2 gas cylinder and tighten it by wrench;2.Remove the black adapter from the
quick coupler firstly,and screw it onto the soda machine by wrench,then
connect the quick coupler;3.Open the valve of the large gas bottle;4.Done,you
can enjoy your sparkling water.if you want unscrew the pin valve from the
machine:1.Close valve of the large gas bottle;2. Press the machine button
several times to let the gas out, otherwise the o ring in coupler will be
blowed out.3.Disconnect the quick coupler.Please pay attention:Our unit works
with GAS CO2 only, not liquid CO2. liquid CO2 will create a bad taste in your
drink.
 
Product Features
  

         
Allows to use a standard CGA-320 large CO2 tank in most soda machines. Works with most soda machines and allows normal operation without any permanent changes.
         
Save money on the refill. This system allows you to connect your soda machine to CG320 co2 tank.Outlet Valve, like 5lb, 20LB or 50lb commercial CO2 tanks.
         
DN3 6mm Microbore Hose length 5ft(1.5 meter), high pressure hose,very soft,not easy to fold break. The hose material is food-grade materials, which is no odour.
         
Suitable CGA320 Valve of CO2 Tank (USA, CAN, Brazil, Colombia, Philippines...).Tips: this soda water accessory can not work with RPV-value(residual pressure value), please check your CO2 value before purchase.
         
Light weight and Easy to Install, this soda co2 cartridges adapter is 60 inches long and the weight is sonly about 0.33kg,compared to other heavy ones,this one is more suitable for quick installation.