Kidsneed SM43E Add on Baby Camera Unit
PAIRING THE ADD-ON CAMERA (BABY UNIT) WITH YOUR SM43E PARENT UNIT To renew the
pairing of your units or pair a new/additional Baby Unit, follow the procedure
below: Note:Before you begin pairing, be sure to have the Baby and Parent
Units side by side and turned on. On the Parent Unit press the MENU/Exit key
and the menu screen will be displayed. Press the LEFT key or RIGHT key until
the camera icon is highlighted in red then press UP key or DOWN key to select
the desired camera to pair. Press OK key to start the pairing. While the LED
is flashing, press and hold for few seconds the PAIR button in the back of
baby unit. Once paired, an image from the paired camera will display on the
screen. If unsuccessful, please repeat above steps. Press the MENU/Exit key to
Exit. Note:If there is more than one camera to be paired, repeat the above
steps for each camera individually. CAMERA VIEW – SWITCHING BETWEEN THE PAIRED
CAMERAS:This function is only available when two or more cameras are paired.
The following steps should be performed on the Parent Unit (sold separately
with Kidsneed Monitor SM43E):Press OK key to view / scan camera. It will
switch the view to the next paired camera.On the top of the LCD display you
will see the number of the camera it is connected to. AUTOMATIC SCAN (LOOP)
MODE:You can also chose the SCAN (loop) mode and each paired camera will be
displayed on the screen for 10 seconds and then the screen will automatically
change to the next paired camera. Press OK key several times until you will
see the loop sign on the top of the LCD screen.
 
Product Features
  

         
Allows monitoring all paired cameras from one Parent Unit
         
Allows monitoring all paired cameras from one Parent Unit
         
Charger included