Hydraulic Log Splitter Cylinder Rebuild Seal Kit for 5.0"bore X 2.0" Rod Cylinde
The seal kit is used to rebuilt Speeco design. To know whether it fits your
cylinder, one good way is to disassemble and measure your cylinder to compare
with each item specification. 1. Cylinder tube Bore (I.D.) 4.5" x rod (O.D)
1.75". Please note some cylinder rod head OD size is not rod size. 2. Wear
rings. Piston wear ring : 127 mm (OD 5") x 120.65mm (ID 4.75�) x 9.5mm (0.375"
wide), Nylon Rod wear ring : 50.8mm (ID 2") x 57.15mm (OD 2.25�) x 9.5mm
(0.375" wide) Nylon 3. Piston seals 1 square ring and 1 O-ring. Piston Square
ring: D127 mm x117mm x 3.28mm; O-ring (installed under the square ring): 115
mm x 2.65 mm . CPU + NBR 4. Rod O-ring : 50.8mm x 63.5mm x 5mm, CPU. There is
O-ring inside. 5. Rod dust ring : 50.8mm x 60.3mm 5.5mm /7.3mm, TPU Below is
5" bore x 2" rod cylinder Specification that OEM made by this seal kit:
Retracted (center to center between rod mountain hole and clevis hole: 32.4�
Extended (center to center same as above): 56.4� Stroke: 24�0.05� Dimension
from center of clevis hole to back face of cylinder: 2.95� Dimension from
center of rod end hole to front face of rod: 1.06� Dimension from center of
rod end hole to front face of cylinder: 1.18� Ports: 1/2� NPT Dimension from
port to port: 25.4� Rod: 2.0" rod Rod end mountain hole: 0.55� Clevis Mountain
hole: 1.16� Dimension between mountain clevis to clevis: 0.87� Thickness of
each mountain clevis: 0.375� Length of each mounting clevis: 4.125�
 
Product Features
  

         
Seal Size: 5.0"Bore x 2.0"
         
Brand: Jetuplusllc
         
Part Type: cylinder rebuild seal kit
         
Material: Rubber Plastic