DC 6V-60V Low Voltage Protector Disconnect Switch Module with LCD Display, 30A Under-Voltage Deficit Protector
1.UP Button: Short press to switch the display percentage and time, long press
for 5 seconds to switch the mode, charging mode: IN, discharging mode:
OUT2.SET Button: short press to view the currently set parameters; long press
the SET button to enter the parameter setting interface.3.DOWN Button: Short
press to turn off/on the relay enable (emergency stop function), after the LCD
display is OFF, the relay is disconnected. Setting?UP: Voltage Upper Limitdn:
Voltage Lower LimitOP: Conduction TimedOP: Delayed Connection time (0-999
seconds)FOP in Discharge Mode: Forced Start Time (0-10 seconds) Charge Mode
IN:1.Relay turn ON and battery starts to charge from charger, when Battery
Voltage is less than the Lower Limit Voltage Value dn. 2.Relay turn OFF and
battery stops to charge, when Battery Voltage is more than the Upper Limit
Voltage Value UP. 3.The symbol IN will flashing when charging.4.It display
�nbE� if no battery is connected at the output terminal. Discharge Mode
OUT:1.Relay turn ON and output voltage, battery starts to discharge, when
Battery Voltage is more than the Upper Limit Voltage Value UP. 2.Relay turn
OFF and output no voltage, battery stops to discharge, when Battery Voltage is
less than the Lower Limit Voltage Value dn.3.The symbol OUT will flashing when
discharging.
 
Product Features
  

         
Battery Protection: The dual mode battery charge/discharge control protector safeguards your battery from over-charge and over-discharge, and ensures its longevity. when the battery voltage reaches the set level, the module will automatically disconnect to prevent over-discharge and extend battery life.
         
High Current Capacity: With a 30A high-current relay, this module is suitable for a range of 6-60V batteries, including Lithium batteries, and is ideal for use in various applications such as solar and wind power systems and new energy vehicles.
         
Clear LCD Display: The high-definition LCD screen displays real-time voltage, percentage, and time, making it easier to monitor battery conditions.
         
Customizable Settings: Customize charging time and delay time (0-999 sec), forced turn-on time (0-10 sec) to prevent misoperation due to voltage fluctuations. Also, program battery stop and start values, and enable power-saving mode.