12.6V Charger 3A Lithium Battery Charger AC DC 3S 12V 11.1V 10.8V for 3s10p Lithium ion Battery Electronic Drill Cordless Power
To make your batteries last 10X longer, avoid using batteries below 35% and
don’t charge above 85-90% Input: 100-240V AC 50/60Hz Output: DC 12.6V
3A(3000mA) DC connector: 5.5mm x 2.1mm Polarity: (in)positive and
(out)negative Dimensions: 120(L) x 55(W) x 35(H)mm The output voltage
adjustment rate: 5% Output Ripple & noise: <100mVp-p Operating temperature: 0℃
to +50℃ Storage temperature: -20℃ to +80℃ package : 1 X 12.6V 3A Power Charger
1 X US Power Cord Warning: Before you place order ,Please check if the AC
plug, DC connector and value match with your devices or not, please refer to
the details in the listing.
 
Product Features
  

         
Input: AC 100-240V 50/60Hz. Output: DC12.6V 3A. Inner Positive(+), Outer Negative(-).
         
Charger Protection: short circuit, over load, over-current.
         
105C Output capacitor, global applicable AC Input voltage.100% full load aging test, Internal EMI filter, ripple minimum.The precision current between 0.1A, the voltage tolerance is 0.1V, absolutely not virtual marking.
         
LED: red light -- charging, green light -- charge OK, it stop automatically when the battery is full.
         
Dual IC chip SMD motherboard solutions.
         
The charger keep dry and ventilated environment, avoid hot and humid.
         
12.6V Charger Output 3A Adapter DC 3Series 12V 11.1V 10.8V Lithium Battery Pack Charger, For 11.1V 12V three series of polymer lithium batteries.
         
The one Lithium battery is normally 4.2 volts max, so 3S boards * 4.2volts = 12.6 volts. That way you can't overcharge the batteries as long as they are rated correctly. Make sure you have the correct female power connector for this: 5.5 x 2.1 mm plug
         
To make your batteries last 10X longer, avoid using batteries below 35% and dont charge above 85-90%